E-Drill is Fast
Quarter-inch aluminum fasteners can be de-flanged in approximately three seconds; Titanium in approximately eight seconds.
E-Drill is Aircraft Safe
Due to the effectively forceless process and reduced operator fatigue, off center drilling and drill wander is eliminated. Risk of damage to underlying panels is dramatically reduced by E-Drill's cut depth control, accurate to 0.005".
 E-Drill is Accurate
Cuts are clean and free of crowns and burrs that can damage the airframe when the pin is driven out.
E-Drill is Easy to Use
It is designed for use with minimal training or experience. After selecting the appropriate size cutting-tip, the operator centers the cutting-tip on the fastener and depresses the trigger. No force is necessary to advance the cutting process; the operator simply holds the tool in place during the short cutting process. The system automatically stops when the preset cut depth is achieved.
 E-Drill is Versatile
The E-Drill works with any metal fastener (e.g., Titanium, Aluminum, Stainless, etc.) and in sizes ranging from 5/32" to 5/16". Removal may be either from front-flange or rear collar, button-head or flush.
E-Drill is Ergonomically Friendly
Since the process is effectively forceless, the operator need only hold the tool in place during the cut period, dramatically reducing the causes of stress and repetitive motion injuries. And since the system does not produce drill shards, eye injuries are also eliminated.
E-Drill is Environmentally Friendly
The E-Drill fastener removal system is a closed loop system that vacuums away debris and collects it to be disposed of appropriately.
|
